2024 Everglades 315 Center Console
$585,000
Boat in Chatham, MA 02633 US
315 Center Console
2 Engines (2x Mercury)
31.5 feet
Gas
Fiberglass/Reinforced
2024 EVERGLADES 315CC - HULL #1 - TWIN MERCURY 400 V10s - SEAKEEPER
FULLY LOADED
"You know the story of Everglades-here's the one that sets the standard."
This 2024 Everglades 315CC - HULL #1 was built for a high-level Everglades executive as a showcase vessel and it shows.
This is one of the most dialed-in, best-equipped 315s on the market with the right power, premium options, and a layout that works for both serious fishing and cruising.
Skip the wait for a new build-this is a top-spec boat done right.
SPECIFICATIONS
LOA: 32' 4" Beam:
10' 8" Draft:
24" Deadrise:
22°Dry Weight:
11,500 lbs. Dry Weight
Fuel Capacity: 300 gallons
Fresh Water: 35 gallons
Holding Tank: 9 gallons
CONSTRUCTION - EVERGLADES RAMCAP
Everglades' RAMCAP construction delivers a solid, quiet, and extremely capable offshore ride. Closed-cell foam-filled hull Vacuum-infused construction
One-piece structural grid No wood construction the hull and liner are chemically bonded, creating a rigid, unsinkable structure with reduced vibration and a noticeably smoother ride in rough water.
POWER & PERFORMANCE
Twin Mercury 400 V10s (Warranty through 12/2026 - extendable)
Cruise: Low-mid 30 MPH
Cruise RPM: ~3500-4000
Range: ~325 miles
Top Speed: High 50s MPH
Strong midrange power, quick to plane, and extremely predictable in changing offshore conditions.
STABILITY & CONTROL
Seakeeper SK2 Gyro Stabilizer
Seakeeper Ride 600 System
Exceptional roll reduction at rest and automatic trim/pitch control underway
huge upgrade for comfort in New England conditions.
HELM & ELECTRONICS
Dual Garmin 8622 (22") displays
Garmin Fantom 54 Open Array Radar
Garmin VHF 215CHIRP sonar (B175 High & Low)
GXM54 Sirius Weather/Radio Garmin
Boat Switch digital switching system
ADDITIONAL
JL Audio premium sound system Fusion head unit stereo
Solar panel system with Xantrex controller Xantrex 120V shore charger
Fully integrated Garmin system controlling
Lights, Pumps, Tank Levels, Electrical Systems, Clean, modern helm with full control from one interface.
MERCURY JOYSTICK PILOTING
360° joystick docking control Skyhook (GPS station keeping)
Integrated autopilot (Garmin-linked)
Effortless docking, precise control in wind/current, and true one-hand operation.
FISHING FEATURES
Gemlux 18' carbon fiber outriggers
Multiple rod holders (gunwale, hardtop, console)
Large open cockpit Rigging station with freezer plate
High-capacity live well systemin-deck fish boxes with macerators
Clean, functional layout designed for serious offshore fishing.
LAYOUT & SEATING
Wraparound bow seating with adjustable backrests
Forward console lounge Upgraded helm seating (sit/lean)
Fold-down transom bench
Seating for 14
Includes full canvas package (bow, helm, forward console)
FINISHES & OPTIONS
Whisper Gray hull / Black bottom (fresh bottom paint - 2026)
Coconut tan upholstery
SeaDek throughout
Teak accents
Underwater lights
Light bar
Additional anchor chain
SERVICE & WARRANTY
Mercury Platinum Warranty through 12/2026 (extendable)
Balance of Everglades 5-year limited warranty (transferable)
Lifetime hull warranty (transferable)
400-hour service completed
Trailer Not Included but Available for Purchase
DOCUMENTATION
USCG Documented
Original Owner
BOTTOM LINE
HULL #1. Executive-built. Fully loaded. This is a rare opportunity to own a top-tier Everglades 315CC with premium power, full stabilization, and best-in-class electronics-without the wait.
If you're shopping this class, this is one you need to see in person.
Unsinkable
Lifetime hull warranty
Variable deadrise deep V-hull
Patented closed molded RAMCAP® construction process with high density, closed cell, structural foam flotation
NMMA Certified
Self-bailing cockpit
No wood construction
Hull laminate - premium gel coat, vinyl-ester barrier and knitted bi-axial fiberglass
High density composite transom
Hull liner and deck mated perfectly for a rigid one-piece construction, adding to its long term durability
Hull liner finished inside
Molded-in diamond non-skid
ABS backing used to receive self tapping screws and bolts
Aluminum framework - custom fabricated meeting stringent standards, sand blasted then powder coated using premium marine grade materials
Gunwale boards - all hand laid and extra heavy duty
Wire harnesses - manufactured in-house using marine grade, tinned copper wire, high grade heat shrink connectors and waterproof deutsch plugs
Torque spec tightening on all terminals
Circuit protection - circuit breakers or fuses protect all electrical circuits
Heavy-duty rub rail with 316 stainless steel insert and end caps
316 Cast stainless steel and chrome plated fasteners for additional corrosion and stain resistance
All hardware bedded or gasketed to resist corrosion
Upholstery – extra heavy vinyl with acrylic top coat, Tenara thread, and anti-mildew backing – adhered to high density plastic backing (no wood) with flow through foam cushions
Bonding zinc plate
Heavy-duty, welded bow and stern eyes, bedded and sealed in polyurethane
Bronze high speed intake strainers
Console glove box/storage bin
Console handrail
Digital Switching with touch screen control
Console power port & USB charging ports
Stainless steel drink holders (2)
Recessed storage area on helm face, recessed storage area on dash top with inductive cell phone chargers (2)
Stainless steel steering wheel
Integrated hardtop & windshield frame
Patented sliding windshield with tempered glass & intelligent wiper and wash system
Footrest at helm
Fiberglass hardtop with molded in handrail & drainage trough, aluminum powder-coated frame with hand holds, overhead LED lights (4), spreader lights (4), electronics access hatch, rod holders (6)
Canvas life jacket storage in hardtop
Light bar – 18” low profile hardtop mounted
Head compartment with sink, toilet, teak head cover, holding tank, macerator, lighting, in floor storage with hatch, flooring, retaining rail, teak storage shelf, openingportlight, & lockable door
Cushioned forward console lounge seating with armrests, cup holders (2) & extra large storage compartment with a divider, dedicated fender, rope, and casting platform storage
Anchor locker with rope hold & fixed cleat and anchor lanyard
Electric windlass, dedicated tool storage, integrated through the stem anchor chute, 200’ of ½” 12 Plait Rope with 10’ of 1/4” chain with stainless steel swivel and plow style anchor
Split bow seating with cushions, cup holders & storage
Under gunnel storage boxes (4), line storage hooks
Bench style helm seat with arm rests and hand rails
Anti-fatigue mat at helm
Aft facing mezzanine seating with folding bolsters, arm rests, hand rails, insulated storage tub tub and tackle storage bin (2)
Stainless steel quick release fender pins (4)
Side utility door with integrated gate and oversized stainless steel hardware
Ladder for side access reboarding door with dedicated storage
Bilge access hatch with drainage
Stainless steel folding aft bench seats (2)
10” pop-up cleats cast 316 stainless steel & through bolted (6)
Stainless steel drink holders (12)
Oversized recessed cockpit drains with stainless steel covers
Bow casting platform with filler cushion transformable to bow table with pedestal with dedicated storage
Coaming bolsters around entire perimeter of deck
Flush style motor well with Integrated swim platforms (2) with handrails (2) and telescoping ladder (1)
Low profile aluminum powder-coated bow rails
Anti-fatigue helm pad – mocha or storm gray
Premier audio package – Fusion 770 control head
Interceptor style Zipwake trim tab system with automatic leveling & roll control
Dual bilge pumps
High-water alarm
LED anchor light
LED navigation lights
Compass
Electric horn
Battery charger
Batteries AGM (4), two engine start and two house batteries
Full color spectrum hardtop & deck courtesy lighting
Pull out fresh-water shower
Fresh and salt water wash down hoses stored in flush mounted retractable hose reels
Single level cockpit with unobstructed 360 degree gunnel access
Dual transom mounted circulating live wells with light, clear acrylic lid, stainless steel friction hinges & latch – 25 gal each
Forward 80 gallon insulated in deck fish box with macerator pump and overboard discharge
Dual 40 gallon insulated in deck fish boxes with macerator pump and overboard discharges
Stainless steel rod holders (12) bedded & through bolted
Stainless steel combination rod-cupholders (4) bedded & through bolted
Under gunwale rod racks (4) with toe rails (2)
Under gunwale power ports (2)
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 3/28/26 | Initial price | $585,000 |
Videos from Monahan's Marine on this 2024 Everglades 315 Center Console
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker

Address
Boat Location
Contact Monahan's Marine about 2024 Everglades 315 Center Console
396 Washington St, Weymouth, MA, 02188
Contact Monahan's Marine
396 Washington St, Weymouth, MA, 02188

























































































